ShenZhen ZKHY RFID Technology Co., Ltd.
Respect Integrity Innovation
Add to Cart
Impinj R2000 IP65 Multi Interfaces RFID Fixed Reader Warehouse Management
ZK_RFID406 fixed reader is a high performance fixed reader with Impinj R2000 chip. It based on Self-intellectual property.It has long distance reader range and faster read speed.It can use in Sport timing system and inventory management.
Specification:
| Working frequency | 865~868MH, 902~928Mhz(can be Customized) |
| Chip | Impinj R2000 |
| Interfaces | RS232/RS485, USB(Slave), GPIO,RJ45 with WiFi and POE optional |
| Output Port | 4 TNC Antenna Port with antenna auto-runing and failure-detection |
| RF output power | 0~30dBi(Adjustable) |
| Transmission mode | FHSS or Fix Frequency transmission |
| Working mode | Auto-running, answer,trigger-activating and real-time-inventory |
| Read Range | Depends on antenna gain |
| Write Range | Depends on antenna gain |
| Power Supply | DC+9V |
| Signal | Buzzer and LED |
| Storage temperature | -10- +55℃ |
| Operating temperature | -20 +75℃ |
| Item Size | 310*210*41mm |
| N.W | 1880g |
| G.W | 2850g |
FEATURES:
1. Self-intellectual property;
2. Designed with Impinj R2000 RFID engine;
3. Support ISO18000-6C(EPC C1G2) , ISO18000-6B protocol tag;
4. 860~868MHz/902~928MHz frequency band(frequency customization optional);
5. FHSS or Fix Frequency transmission;
6. RF output power up to 30dbm(adjustable);
7. 4 TNC antenna port with antenna auto-tuning and failure-detection;
8. Support auto-running, answer, trigger and real-time-inventory work mode;
9. Tag buffer size up to 800PCS (Max. 496bits EPC length);
10. Support EPC and TID inventory;
11. Low power dissipation with single +9 DC power supply;
12. Support RS232, RS485, RJ45(TCPIP) with WiFi and POE optional;
13. High reliability design;
14. Support on-the-site firmware upgrading and optional Wince or Linux Operation System.
CHARACTERISTICS
Absolute Maximum Rating
ITEM SYMBOL VALUE UNIT
Power Supply VCC 16 V
Operating Temp. TOPR -10~+60 ℃
Storage Temp. TSTR -20~+75 ℃
Electrical and Mechanical Specification
Under TA＝25℃,VCC＝+9V unless specified
ITEM SYMBOL MIN TYP MAX UNIT
Power Supply VCC 8 9 12 V
Current Dissipation IC 800 1500 mA
Frequency FREQ 902 902~928 928 MHz
Size Size 310×210×41 mm
MECHANICAL DATA(UNIT mm):
INTERFACE
1. Power J1
No. Symbol Comment
2 PWR +9VDC
4 GND Ground
1,3 NC Reserved
2. WiFi Antenna J2 (SMA Female)
3. USB J3 (Slave)
4. USB J4 (Reserved)
5 . TCPIP RJ45 Socket J5
6 . UART J6 (RS232 DB9 Female)
No. Symbol Comment
1 NC Reserved
2 TXD Data output in RS232
3 RXD Data input in RS232
4 NC Reserved
5 GND Ground
6 NC Reserved
7 NC Reserved
8 NC Reserved
9 NC Reserved
7 . GPIO J7 (DB15 Female)
No. Symbol Comment
1 Output1 General output 1
2 Output2 General output 2
3 Output3 General output 3
4 Output4 General output 4
5 Input 1 General Intput 1 with Internal 47k resistor pulled-down to ground
6 Input 2 General Intput 2 with Internal 47k resistor pulled-down to ground
7 Input 3 General Intput 3 with Internal 47k resistor pulled-down to ground
8 Input 4 General Intput 4 with Internal 47k resistor pulled-down to ground
9 TGIN Trigger input with internal 10k resistor pulled-up to +5V
10 R+ R+ in RS485
11 R- R- in RS485
12 GND Ground
13 NC Normal-Close terminal of internal relay
14 NO Normal-Open terminal of internal relay
15 CM Common terminal of internal relay
8. TNC Antenna Port1~Port4 J8~J11
9. LED indicator
Symbol Comment
POWER Power on indicator
RUN Command-executing indicator
TAG Tag-detected indicator
WIRELESS WiFi active indicator
ALARM Alarm indicator
1~9 RSSI indicator
*Specifications are subject to change, please pay attention to our latest version.P
Application:
It can widely use in manu area.Such as library EAS system,Warehouse system etc.
