
Add to Cart
High cost perfomance 4-port long range UHF RFID reader for warehouse management
High cost perfomance 4-port long range UHF RFID reader for warehouse management is a high cost performance UHF RFID fixed reader for warehouse management. It is designed upon fully self-intellectual property. Based on proprietory efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, anti-counterfeit and industrial production process control system.
Specification:
Model No. | ZK-RFID401 |
Protocol | ISO18000-6B, ISO18000-6C (EPC C1 GEN2) |
Working Frequency | ISM 865-868MHz,902-928MHz(can be customized) |
Operation Mode | FHSS |
RF Power | 0~30dBm(adjustable) |
Interface | RS232/RS485, RJ45 (TCP/IP), GPIO. |
Output Port | 4 TNC Antenna port |
Antenna | One ~ Four Antennas, TNC connector |
Read Range | Depending on antenna’s gain.Connected with 12dBi antenna, the reading distance is up to 15m |
Write Range | Depending on the antenna's gain. |
Signal | BUZZER and LED |
LED Indicator | Power, RF Operation, Ethernet Activity |
Mounting | Wall mountable |
Enclosure | Anodized Aluminum Alloy Enclosure |
Receive sensitivity | -75dbm |
Power Supply | DC+9V (provide AC/DC power adapter) |
Dimension | 225*170*40mm |
N.W | 1230g |
G.W | 2100g |
Operation Temp | -20°C ~ +70°C |
Storage Temp | -20°C ~ +75°C |
INTERFACE
1. Power (DC JACK)
No. | Symbol | Comment |
Central | PWR | +9VDC |
Outer | GND | Ground |
2. GPIO (DB15 Female)
No. | Symbol | Comment |
1 | Output1 | General Output1 |
2 | Output2 | General Output2 |
3 | Output3 | General Output3 |
4 | Output4 | General Output4 |
5 | Output5 | General Output5 |
6 | Output6 | General Output6 |
7 | Output7 | General Output7 |
8 | Output8 | General Output8 |
9 | TGIN | Trigger input with internal pull-up to 5V through a 10k resistor |
10 | R+ | R+ of RS485 |
11 | R- | R- of RS485 |
12 | GND | Signal Ground |
13 | NO | Normal-Open terminal of internal relay |
14 | NC | Normal-Close terminal of internal relay |
15 | CM | Common terminal of internal relay |
3. Serial communication port RS232 (DB9 Male)
No. | Symbol | Comment |
1 | nc | Reserved |
2 | TXD | General Output2 |
3 | RXD | General Output3 |
4 | nc | Reserved |
5 | GND | Ground |
6 | nc | Reserved |
7 | nc | Reserved |
8 | nc | Reserved |
9 | nc | Reserved |
4. TCPIP network (RJ45)
5. TNC antenna port ANT1~ANT4
6. LED indicator LED1~LED7
No. | Symbol | Comment |
1 | LED1 | Antenna 1 active indicator |
2 | LED2 | Antenna 2 active indicator |
3 | LED3 | Antenna 3 active indicator |
4 | LED4 | Antenna 4 active indicator |
5 | LED5 | Tag-detected indicator |
6 | LED6 | Command-executing indicator |
7 | LED7 | Power-on indicator |
CHARACTERISTICS
l Absolute Maximum Rating
ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC | 16 | V |
Operating Temp. | TOPR | -10~+55 | ℃ |
Storage Temp. | TSTR | -20~+75 | ℃ |
l Electrical and Mechanical Specification
Under TA=25℃,VCC=+9V unless specified
ITEM | SYMBOL | MIN | TYP | MAX | UNIT |
Power Supply | VCC | 8 | 9 | 12 | V |
Current Dissipation | IC | 600 | 1500 | mA | |
Frequency | FREQ | 902 | 928 | MHz |
* Effective distance depends on protocol, tag and environment.
FEATURES
l Self-intellectual property;
l Support ISO18000-6C(EPC C1G2) , ISO18000-6B protocol tag;
l 902~928MHz frequency band(frequency customization optional);
l FHSS or Fix Frequency transmission;
l RF output power up to 30dbm(adjustable);
l 4 TNC antenna port;
l Support auto-running, interactive and scanning work mode;
l Low power dissipation with single +9 DC power supply;
l Support RS232, RS485, TCPIP with other interface optional;
l Built-in LED, Buzzer, GPIO and Relay;
l High reliability design.
Application solution:
RFID Solutions for cattle